The basement is a good place to store large gun safes if you don’t want them to be seen easily.
Since your basement is inside your house and you can better monitor it, it also provides greater security than your garage.
There are many similarities between basement gun safes and garage gun safes. It will also be more challenging for you to access when you are in need of it.
When it comes to protecting larger guns, a basement gun safe is just as effective as a garage gun safe.
It is even better to keep your valuable firearms out of sight in a basement gun safe than in a garage gun safe.
Install A Basement Gun Safe To Protect Your Guns
A gun safe should be bolted down on a cement surface using heavy-duty anchors or bolts for maximum security. An interior concrete slab foundation can also be used for this.
If you understand the risks and take the proper precautions, you can install your safe in your basement, although there are some definite issues to consider first.
A Gun Safe Shouldn’t Be Exposed To Moisture Or Humidity
There is usually no heating or air conditioning in garages. In some cases, basements are not as well. Moisture and humidity that accumulate on top of concrete may cause them to remain damp.
Basements are also susceptible to flooding. Since steel contains iron, it is naturally prone to rust, which is why manufacturers pickle and oil the steel before they manufacture gun safes.
In this process, the steel is cleaned of any impurities, and then oiled to prevent rust and corrosion.
A rubber mat or epoxy floor is a good way to protect the bottom of the safe from moisture in a basement or garage.
Risk Of Flooding
You should also consider whether your basement or garage are at risk of flooding. In this case, you might want to elevate your safe on a base.
It is best to anchor your safe to a steel base that can be anchored into the floor. To allow water to flow underneath, you can also use a wooden platform or even cinder blocks.
You should be aware that elevating your safe on a base could compromise your security. Putting a jack underneath your safe makes it easier for thieves to lift it off base and haul it off or pry apart the door if it is high enough.
Moreover, the cinder blocks cannot be anchored to the floor, nor can the safe be anchored to the blocks, which presents a security and safety risk.
Be aware of the ramifications of elevating your safe from the ground, even if you anchor it to the wall.
Make sure to test your sump pump and backup battery regularly if you want to prevent flooding in your basement.
Protecting The Contents Of Your Safe
When you keep your safe in an area prone to moisture and humidity, what is supposed to protect the contents from a fire can actually work against you.
It is possible for fire-board to absorb moisture while serving as insulation against heat and fire. It is possible for moisture to damage the items you keep in your gun safe:
- It is possible for cash, photos, and documents to mildew and smell musty.
- There is a possibility of rusting on guns.
- Tarnish can occur on jewelry.
Accessories designed to reduce humidity inside your safe will prevent this from happening.
Using a dehumidifier, dry air can circulate inside your safe and the air is heated. In the process, moisture from the air inside your safe is forced out through the small cracks around the door.
Using a desiccant is another option, which doesn’t require power. Your valuables will not be affected by moisture absorbed in your safe.
Where Should I Put My Gun Safe?
One of the best ways to protect your firearms and valuables from theft is to have a gun safe at home.
You must choose the right place in your home to put that safe if you want it to last and perform well. If you are considering where to place your gun safe, take these factors into account.
Climate And Weather Control
A climate-controlled environment is ideal for your safe, where it won’t be exposed to extreme cold or heat.
A safe’s interior can be affected by the temperature outside. Consider putting your safe in an attic, basement, garage, or shop that is not climate controlled.
If you’re putting a safe in a discreet location, you’ll want easy access to it. So what are you going to do?
Keeping your valuables in a quality safe will give you more peace of mind about keeping them hidden away somewhere that is so difficult to access that you never use them.
Put the safe in a place that’s not right out in the open, but is still easily accessible, and buy a good safe from a reputable company.
Any type of flooring can be used to install a gun safe. Harder surfaces, such as concrete and hardwood flooring, produce the best results.
Safes that are properly bolted prevent thieves from tipping them over when they attempt to pry your safe open by prying off the door.
Gun Safe Weight
The steel used in gun safes is usually thick and heavy. Your home must be able to bear the weight of the safe.
Make sure the floor and the underlying support for your safe are structurally sound if you plan to install it on the second floor or above a basement or crawl space.
It is recommended that you have the safe inspected by a professional or consult a reputable safe dealer or a safe-moving company if you are unsure about it.
It is important to install your safe in a spot where floodwaters will not reach it in the event of a flood.
Even if you have a sump pump in your basement, it is possible that it can fail, especially if your power is out.
It is not a good idea to place a safe in the basement, since it is the dampest place in your home.
A gun safe is more likely to be damaged by moisture and humidity than by burglaries or fires. It is still possible for humidity to leak into a safe despite it being closed, resulting in firearms and other items inside being damaged.
As long as you keep moisture out of your basement, it is a good place for gun safes. Other tips for keeping humidity out of your gun safe include using a dehumidifier or silica gel packets.
Additionally, you should check the safe regularly to make sure there is no water condensation inside.